How to properly install the cabinet handle

The cabinet handle is a hardware accessory for the cabinet, which has a strong aesthetic effect on the appearance of the cabinet.

At the same time, the frequency of use of the cabinet handle is still very high.

Therefore, the cabinet handle is a convenient design, which is convenient for everyone to open the cabinet door and take things.

Therefore, it is also important to choose a suitable, beautiful and comfortable cabinet handle.

How to install the cabinet handle?

The cabinet handle installation steps are as follows:

Step 1: First use a ruler to measure the hole spacing.

Step 2: Measure the installation position on the cabinet door.

Step 3: Drill the screw mounting hole with a drill bit with a drill of the appropriate size.

Step 4: Hold the handle on the outside and insert the screw from the inside to the outside of the cabinet.

Step 5: Align the screws with the handle mounting holes and tighten with a screwdriver.

Step 6: The installation is successful, simple and beautiful.

Through the introduction of the article, I believe that everyone has some understanding of how to install the cabinet handle.

When installing the handle, be sure to pay attention to the safety of the drill.

At the same time, pay attention to the height of the installation, must meet the ergonomic requirements, so that it can be used in the future.