Rectangle Zinc Alloy Interior Passage Door Knobs

$32.99

$32.99 - $32.99

$32.99

$32.99 - $32.99

SKU MS7817EC13-1

15% OFF SITEWIDE | CODE: PRE15

20% OFF ORDER $999+ | CODE: PRE20

🛠️ Are you a Pro/Contractor? Apply for Trade Discount

Product Description

Product Overview

Upgrade your interior doors with the Goldenwarm Passage Door Knobs. Designed for rooms that do not require locking, these non-locking interior door knobs are ideal for hallways, laundry rooms, closets, pantries, and other frequently used spaces. Made from durable zinc alloy and designed for standard U.S. doors, they offer smooth everyday operation with a clean, modern look.

Material: Zinc Alloy
Brand: Goldenwarm
Function: Passage / Non-Locking
Handle Type: Knob
Lock Type: No Lock
Recommended Use: Hallways, Laundry Rooms, Closets & Pantries

Product Features

Keyless Passage Door Knobs: These passage door knobs are designed for interior doors that do not require locking. With no key and no locking mechanism, they provide convenient access from either side of the door.
Ideal for Hallways, Closets & Laundry Rooms: Perfect for hallway doors, laundry rooms, closets, pantries, and other interior spaces where privacy is not required but a working latch is needed.
Durable Zinc Alloy Construction: Made from high-quality zinc alloy, these interior door knobs are sturdy, durable, and built for reliable everyday use.
Long-Lasting Finish: The electroplated finish creates a smooth, modern appearance while helping resist everyday wear, fading, and corrosion.
Fits Standard U.S. Doors: Designed for doors approximately 1-3/8" to 1-3/4" thick with an adjustable latch that fits standard 2-3/8" or 2-3/4" backsets. Please measure your door before ordering to ensure proper fit.
Reversible for Left or Right-Handed Doors: The ambidextrous design works with both left-hand and right-hand doors, making installation flexible for different rooms throughout your home.
Easy DIY Installation: Designed to fit standard pre-drilled doors and includes the required installation hardware. A screwdriver is typically all that is needed for quick replacement or installation.
Smooth Everyday Operation: The turning knob operates the latch smoothly from either side, making it a practical choice for high-traffic interior areas.

Product Information

Brand	Goldenwarm
Material	Zinc Alloy
Function	Passage / Non-Locking
Handle Type	Knob
Locking Function	No Lock
Latch	Working Passage Latch
Backset	2-3/8" or 2-3/4"
Door Thickness	1-3/8" to 1-3/4"
Hand Orientation	Left or Right Hand
Door Use	Indoor
Recommended Rooms	Hallways, Laundry Rooms, Closets, Pantries
Installation	Fits Standard Pre-Drilled Doors
Included Components	Door Knob Set, Adjustable Latch, Strike Plate, Screws and Installation Hardware

Designed for Non-Locking Interior Doors

Goldenwarm passage door knobs are ideal for interior spaces where a working latch is needed but privacy locking is not. They are especially well suited for hallways, closets, laundry rooms, pantries, and other shared areas.

Unlike privacy door knobs, passage knobs do not lock. Unlike dummy knobs, they turn and operate a latch, allowing the door to open normally from either side.

Notice

Color：The same color of different products may vary due to material, lighting, etc. Please try to purchase products from the same series to ensure uniform color.
Care: Clean with warm soapy water and a soft cloth. Avoid abrasive towels, sponges, cleaning sprays, bleach and hand sanitizers.

Installation

Handle Installation Guide

Each handle comes with 2 M4 1 inch & 1.57 inch machine screws and is simple to install

If your furniture or door already has a knob or handle on it, you may be able to unscrew the current one and replace it using the existing screw. If not, you will need to drill a small hole (or holes) in your door or furniture and tighten with a Philips screwdriver.

A better fit starts with one measurement

How to Measure Cabinet Pulls

Replacing a cabinet pull? Measure the distance between the screw holes before choosing a size. This is the center-to-center (C-C) measurement.

Find the screw holes. Open the drawer or cabinet door and locate the mounting holes. Remove the existing pull if the centers are hard to see.
Measure center to center. Measure from the center of one screw hole straight across to the center of the other. Record the distance in inches or millimeters.
Choose the matching C-C size. Compare your measurement with the “Hole Centers” or “Size” options on the product page. For an existing two-hole installation, match the C-C measurement.

Measuring Cabinet Knobs

Most cabinet knobs use one mounting screw hole, so there is no center-to-center distance to measure. For a replacement knob, measure the existing hole location and check the knob’s base diameter and projection (how far it extends from the cabinet). If switching from a pull to a knob, the old two-hole marks may remain visible unless they are filled or covered.

Quick tip: A pull’s listed size usually means its hole spacing, not its full end-to-end length. Check the product’s dimension drawing if you also need the overall length.

Plan the position before you drill

Where to Place Cabinet Pulls

These common placement guidelines help create a balanced look. Keep the position consistent across doors and drawers.

Drawers

Place one pull at the horizontal center of a small drawer. On a wide drawer, use one longer pull or two pulls, positioned evenly.

Upper Cabinet Doors

Place the pull near the lower corner on the opening side of the door. Keep the same distance from the edges on matching doors.

Lower Cabinet Doors

Place the pull near the upper corner on the opening side of the door. Repeat the same position across the cabinet run.

Before drilling: Mark the position with painter’s tape or a hardware template. Check that every pull is level and consistently spaced before making holes.

Cabinet Pull Size & Installation FAQs

What does center-to-center (C-C) mean?

C-C is the distance between the centers of the mounting screw holes on a pull. It is also called hole spacing. Match this measurement when replacing a pull and reusing the existing two holes.

How do I measure cabinet pulls for a replacement?

Measure from the center of one mounting hole to the center of the other. If the old pull is still installed, measure the holes or the distance between its screw posts from the back of the drawer or door. Do not measure from the outside ends of the handle.

Is the listed pull size the same as its overall length?

Usually, no. The listed size for a multi-hole pull refers to its C-C hole spacing. The overall length is the full end-to-end measurement and is typically longer. Use the product dimension drawing for the exact overall length.

Will a new pull fit my existing holes?

It should align with the existing holes when the new pull has the same C-C measurement. Check the product’s dimensions as well: the handle’s base or end posts may not cover marks left by different hardware, even when the screw holes align.

What if I want to replace a knob with a pull?

A typical knob uses one mounting hole, while a pull uses two. You will usually need to drill a second hole, and the original hole may need filling if the new hardware does not cover it. Check the pull’s C-C size and overall dimensions before drilling.

What pull size should I choose for a new cabinet or drawer?

With new, undrilled cabinetry, choose a size that feels comfortable and looks balanced with the door or drawer. Longer pulls can suit wider drawer fronts; smaller pulls or knobs can suit narrow fronts. There is no single required size—compare the product’s C-C and overall dimensions, and use a template to check placement before drilling.

Are mounting screws included?

Screw inclusions and lengths can vary by product. Check the “Package,” “Accessories,” or “Specifications” section on the product page. The screw must suit the thickness of your cabinet front and the hardware; a longer screw may be needed for a thick drawer front.

Where should I place pulls on cabinet doors and drawers?

Pulls are commonly centered on drawer fronts. On cabinet doors, they are usually placed near the opening edge—near the lower corner of an upper door or the upper corner of a lower door. Keep placement consistent, and mark and check the position with a template before drilling.

Which size should I order if my measurement falls between two options?

For replacement hardware, do not round to a nearby size: the screw holes need to align. Measure again from hole center to hole center and check the product’s available C-C options. If you are unsure, contact Goldenwarm with your measurement and product link before ordering.